Our Illuminated Flashing Pedestrian Sign ( W11-2) conforms to the specifications of the Federal Highway Administration (FHWA) set forth in the Manual on Uniform Traffic Control Devices (MUTCD). Using our innovative LED technology, the system employs a set of synchronized high-intensity LEDs. They extend the range of visibility of the sign during the day or night in all weather conditions. Furthermore, driver awareness of the sign increases because the LEDs are flashed.

Typical applications include:

  • Mid-Block Crosswalks
  • School Zones
  • Parks
  • Playgrounds
  • Shopping Malls
  • Hospitals.

Activation options:

  • Continuous 24/7 Flashing
  • Programmable Timer
  • Wireless Push-button

High Visibility

  • Type IX reflective sheeting provides outstanding reflective brightness, day or night.
  • High intensity LEDs extend the visibility of the sign under all weather conditions.

Superior Performance

  • Low power LED technology reduces system power consumption and operating cost.

Outstanding Durability

  • Highway grade .080 aluminum construction provides resistance to corrosion
  • The use of highway grade Type IX sheeting helps to maintain long term reflectivity
  • Stainless steel security fasteners and Tufnut mounting hardware included to keep the sign secure
  • Signs are weatherproof to prevent outside elements from entering the internal casing

Features

  • MUTCD section 2A.07 compliant.
  • MUTCD  W11-2
  • Type IX reflective sheeting provides outstanding reflective brightness, day or night.
  • Four 1 ¼” White LED Lights on 24″ Signs
  • Eight 1 ¼” White LED Lights on 30″ – 48″ signs. LEDs extend the visibility of the sign under all weather conditions.
  • Highway grade .080 aluminum construction provides resistance to corrosion.
  • Stainless steel security fasteners and Tufnut mounting hardware included to keep the sign secure.
  • Signs are weatherproof to prevent outside elements from entering the internal casing.
  • Fast, easy installation, low maintenance.

 

Various Pedestrian Signs We Offer:

 

Custom  Solar Flashing Pedestrian Sign in Las Vegas

 

Reflective Sheeting      

Type IX Fluorescent Yellow Green (FYG)

Standard for School Zone and Pedestrian signs

   

Type IX Diamond Grade Sheeting

Best for all applications – delivers optimal performance at all sight distances and angles.

Sign Materials – Construction – Compliance

  • Sign reflective sheeting in compliance with current MUTCD requirements for reflectivity, wording, materials and mounting guidelines.
  • Pole mounting requirements per MUTCD guidelines.
  • Sign constructed of .080 aluminum with stainless / aluminum fasteners and weatherproof sealant.
  • All mounting hardware fasteners shall be theft deterrent hardware preferably Tufnut security hardware where applicable.
  • 3/8″ x 3″ stainless steel tap bolts for standard mounting hardware (other mounting options available).
  • Battery access compartment located at lower portion of sign to allow access to battery compartment for maintenance (field replaceable battery).
  • Solar signs to have a 2″ to 4″ wide casing, depending on model, between front and rear sign faces to enclose all wiring, battery, PCB and LED light connections. AC powered signs 2″ wide casing.
  • Security keyed ON/OFF switch located on side of casing controlling operation.
  • Vented weatherproof casing allowing ambient air to circulate for internal components and prevent condensation and excessive heat buildup.
  • Compression type solar panel connector allowing optimum directional placement of solar collector.
  • Anti-theft placards and decals for theft / vandalism deterrents.
  • Serial # plate with manufacture date for informational and warranty purposes

Battery

12 Volt 12 Volt 22000mAH SLA 6 Volt 2 – 6 Volt 9000mAh SLA (18 Ah Total)
7.14″ x 3.03″ x 6.59″ 5.95″ x 1.34″ x 3.70″
12.74 lb. 3.09 lb.
Nut/Bolt T2 – Spade
-40°F to +156°F -40°F to +156°F
1 Year 1 Year

Solar Panel Collector

  • Solar panels to be 6/12 volt 15/20/30 watt collector type depending on type of sign, region, LED light quantities and application uses.
  • Solar panel bracket constructed of aluminum alloy.
  • Schedule 40 3/4″ aluminum tubing attached to the solar panel bracket to the upper casing of the sign casing. Panel must face south.
  • Angle of panel shall be 45° to 65° depending on region. Special attention required to insure solar collector has good access to solar power with no obstructions for optimum operation.
  • Electrical connectors shall be insulated spade type connectors.
  • Tempered glass solar cell sealer/protector.

LED Lights (Light Emitting Diodes)

  • Sign shall have a series of either 4 – 8 LEDs depending on sign size and configuration.
  • All LEDs shall be compliant to MUTCD Section 2A.07 and match colors acceptable to each type of signal per this specification.
  • LED flash rate at 50 to 60 times per minute per MUTCD Section 2A.07 requirements.
  • LED light dimensions: 1/8″ Cree LED inside a 1-1/4″ diameter lens.
  • 100,000 hour rated LED life (11.415 years).
  • High impact acrylic water/vibration proof housing lens.
  • Completely resin sealed lens.
  • Operating voltage: 6/12 VDC / Amp Draw 85ma.
  • Rubber grommet mounted (for easy in-field replacement) into a 1-1/4″ hole.
  • Output power of LEDs approximate 60,000 mcd brightness.
  • LEDs wired in series for simultaneous flash pattern per MUTCD.
  • Wiring completely enclosed in sign casing with access for replacement.

Circuitry / LED Lighting Control Unit

  • Circuit shall have a minimum of 4 output LED light circuits for use.
  • Circuit shall control flash rates at 50 to 60 times per minute.
  • Circuit shall flash 500 milliseconds / 150 milliseconds per flash.
  • Activation duration shall be field adjustable in one-second increments, over a range of 1 to 99 seconds (30 seconds standard).
  • Available dusk-to-dawn flash mode.
  • Micro-controller technology.
  • Keyed “ON/OFF” activation for tamper/vandalism protection.
  • Operation of circuit temperatures -40°C to +80°C.
  • Circuit enclosed in weatherproof casing.
  • Low voltage protection program (protecting from total discharge of battery).
  • All wiring connections in accordance to standard wiring protection guidelines.

Warranty

  • 10 Year Solar Panel
  • 5 Year Sign Construction
  • 2 Year LED Lights & Circuitry
  • 1 Year Battery

Download Sign Specs Here

View our Website for our full product line

http://www.ustrafficsystems.com/